TA242-1 Plastic Immersion Proof Breather
Loading...

TA242-1 Plastic Immersion Proof Breather

The TA242-1 Immersion Proof Breather is one of AGM’s most economical breathers while boasting a relatively high flow rate for an immersion breather.

Made from black ABS plastic, with a pleasing rounded appearance, it is approximately 1 1⁄4″ in diameter and extends about 3/8″ above its mounting surface. The TA242-1 fits snugly into a .323″ diameter hole (drill size P), or it may be retained in a thin wall (1/8″ or less) with a 5/16 internal star washer.

The TA242-1 is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 3X, 3RX, 3SX, 4, 4X, 5, 6, 6P, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures.

NOTE: This breather may not be used in commercial transit cases.

Part No.: TA242-1

Mounting: Friction fit into a .323 (drill size P) hole or with a 5/16 internal star washer

Material: ABS, black

O-Ring: Neoprene, commercial grade

Flow Chart

TA242-1 Immersion Proof Breather Drawing

Additional information

Weight 0.0000 lbs
Dimensions 0.0000 × 0.0000 × 0.0000 in
Pressure

4 psid

Housing Material

ABS, black

IP/NEMA Rating

NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures

Mounting

Friction fit into a .323 (drill size P) hole or with a 5/16 internal star washer

Immersion Depth

3 meter

Weight

6 grams

Internal O-Ring Material

Neoprene

Flow Chart