TA348 Humidity Indicator Plug
SKU: TA348 (specify card type)

TA348 Humidity Indicator Plug

Description

The TA348 has a smaller "footprint" and is used where panel space is limited. The front mount design reduces installation and removal time.

This clear anodized aluminum Humidity Indicator Plug is designed for installation in a 3/4-14 straight pipe threaded boss. Furnished with an o-ring and a 40% humidity disc.

For optional multiple spot discs, refer to the chart below. Suffix numbers specify optional discs. For instance, TA348-234P includes a 20-30-40% pie sector disc.

Circle Card Part Number
Standard Item
Indicated Humidity Percentage
Segment Type
Yes
10, 20, 30
Pie
Yes
20, 30, 40
Pie
Yes
20, 40, 60
Pie
Yes
30, 40, 50
Pie
Yes
30, 40, 50, 60
Pie
Yes
40
Spot
TA356-HC-60
No
60
Spot

Humidity discs can be changed or replaced in the field with a 0.50 in. hex key wrench.

Also available as TA349 Humidity Indicator Plug with black anodize finish.

Weight: 0.027 lbs. (12 grams)

Maximum Internal Pressure: 10 psi

Mounting Requirements:

Thread size: 3/4-14 Straight Pipe Thread

Recommended installation torque: 20-30 in-lbs

Recommended counter bore size (to help capture o-ring): ∅1.130 ± .010 X .08 ± .010 Deep

Can be mounted in a straight hole if used with mounting nut 356056-16 (sold separately)
Not recommended for mounting in flexible walls or bags

TA348 is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP66/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information.

TA348 Drawing

TA348 Humidity Indicator Plug drawing

Installation Tools (sold separately):

Conformal Driver
Spanner Drive
Conformal Driver
Spanner Drive
Part Number Material Drawing Part Number Material Drawing
348100 Aluminum Alloy PDF
980401-SS Stainless Steel PDF 348110 Stainless Steel PDF

Additional Information

Body Finish

Anodized, Clear

Complies With

SAE AS26860 Type I and/or Type II

Body Material

Aluminum

External Gasket Material

Neoprene, Commercial Grade

Window Diameter

0.675 in (17.1 mm)

Maximum Internal Pressure

10 psi

IP/NEMA Rating

This is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K and 13 enclosures, as well as I66/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application.

Weight

0.027 lbs. (12 grams)

Internal O-Ring Material

IAW MIL-PRF-6855, OR Chloroprene, OR Buna-N OR Nitrile

Indicated Humidity Percentage

10%, 20%, 30%, 20%, 30%, 40%, 30%, 40%, 50%, 30%, 40%, 50%, 60%, 20%, 40%, 60%, 40%, 60%

Segment Type

Pie, Spot