Breather Valve TA292-R
SKU: TA292-R

Breather Valve TA292-R

Description

The TA292-R Breather Valve was designed to meet the need for a low cost, two-way valve for use on transit cases and similar applications up to 4 cubic feet in volume. The valve has separate and distinct settings for both pressure and vacuum relief. It has a flow rate of 0.5 SCFM at a pressure of 1.5 psi to 2.0 psi above the valve setting. Standard settings range from 0.5 psid to 3.0 psid reseal pressure.

The TA292-R Breather Valve is tamper-proof and requires no field maintenance. Corrosion-resistant materials are used throughout. The valve seal is made of silicone rubber. Each valve comes complete with a nut and o-ring, and is intended for small cases that require a low profile valve. A manual release push button is standard on all TA292-R valves. It is used to equalize pressure or vacuum differentials in order to open the container.

Materials Housing & Hex Nut - Aluminum Alloy, O-Ring - per MS28775-018
Finish Black Anodize
Mounting Requirements Hex nut & an O-ring provided with each valve*
Mounting Hole Diameter 0.76 ± 0.010 (19.3 ± 0.2 mm)
Maximum Wall Thickness 0.24 (6 mm)
Installation Torque 25-35 in. - lbs. (3.0-4.0 N•m)
Weight 0.02 lbs. (8.4 grams)

 

*Add washer for wall thickness less than: 0.05 (1.3 mm). (AGM P/N 196284, order separately.)
For threaded boss installation: 0.750-16 UNF-3B; no counterbore requirement.

Contact AGM's Engineering department for information on NEMA and IP ratings.

TA292-R Drawing

TA292 Breather Valve Drawing

 


 

Two-Way Pressure and Vacuum Relief Valves

PRESSURE SIDE (FLOW OUT)
VACUUM SIDE (FLOW IN)
Dash No.
Sealed @
Flow Rate @ Pressure
Dash No.
Sealed @
Flow Rate @ Pressure
-05
0.5 psid*
0.5 SCFM† @ 2.0 psid*
-05
0.5 psid*
0.5 SCFM† @ 2.0 psid*
-10
1.0 psid*
0.5 SCFM† @ 2.5 psid*
-10
1.0 psid*
0.5 SCFM† @ 2.5 psid*
-15
1.5 psid*
0.5 SCFM† @ 3.0 psid*
-15
1.5 psid*
0.5 SCFM† @ 3.0 psid*
-20
2.0 psid*
0.5 SCFM† @ 3.5 psid*
-20
2.0 psid*
0.5 SCFM† @ 3.5 psid*
-25
2.5 psid*
0.5 SCFM† @ 4.5 psid*
-25
2.5 psid*
0.5 SCFM† @ 4.5 psid*
-30
3.0 psid*
0.5 SCFM† @ 5.0 psid*
-30
3.0 psid*
0.5 SCFM† @ 5.0 psid*

*To convert to metric equivalent (millibars) multiply by 69.
†To convert metric equivalent (liters/sec) multiply by 0.472.
Dash numbers for the Pressure and Vacuum sides may be used in any combination (i.e. TA292-05-15-R). Before making drawings of these valves, contact AGM for part numbers to be used.

 


 

One-Way Pressure or Vacuum Relief Valves

While typically configured as a two-way valve, this valve can also be configured for one-way flow. Refer to the TA292-P and TA292-VR drawings. The vacuum relief version of the valve includes a manual release, but the pressure relief version does not. Contact AGM's Engineering Department for assistance, if needed.

TA292-P Drawing

TA292-VR Drawing

PRESSURE SIDE (FLOW OUT)
VACUUM SIDE (FLOW IN)
Dash No.
Reseal Pressure*
Flow Rate*
Dash No.
Reseal Pressure*
Flow Rate*
-P-025
0.25 psid
0.5 SCFM† @ 1.75 psid
-VR-025
0.25 psid
0.5 SCFM† @ 1.75 psid
-P-05
0.5 psid
0.5 SCFM† @ 2.0 psid
-VR-05
0.5 psid
0.5 SCFM† @ 2.0 psid
-P-10
1.0 psid
0.5 SCFM† @ 2.5 psid
-VR-10
1.0 psid
0.5 SCFM† @ 2.5 psid
-P-15
1.5 psid
0.5 SCFM† @ 3.0 psid
-VR-15
1.5 psid
0.5 SCFM† @ 3.0 psid
-P-20
2.0 psid
0.5 SCFM† @ 3.5 psid
-VR-20
2.0 psid
0.5 SCFM† @ 3.5 psid
-P-25
2.5 psid
0.5 SCFM† @ 4.5 psid
-VR-25
2.5 psid
0.5 SCFM† @ 4.5 psid
-P-30
3.0 psid
0.5 SCFM† @ 5.0 psid
-VR-30
3.0 psid
0.5 SCFM† @ 5.0 psid

*To convert to metric equivalent (millibars) multiply by 69.
†To convert metric equivalent (liters/sec) multiply by 0.472.
Contact AGM for availability of part numbers and settings in addition to those shown on the drawings.

Additional Information

Materials

Housing & Hex Nut-Aluminum Alloy, O-Ring-per MS28775-018

Finish

Black Anodize

Mounting Requirements

O-Ring & Hex Nut are provided with each valve

Mounting Hole Diameter

0.76 ± 0.010 (19.3 ± 0.2 mm)

Maximum Wall Thickness

0.24 in. (6 mm)

Installation Torque

25-35 in. – lbs. (3.0-4.0 N-m)

Weight

0.02 lbs. (8.4 grams)