TA761 Ultra High Flow Relief Valve
SKU: TA761

TA761 Ultra High Flow Relief Valve

Description

Similar to AGM's TA796 valve, the TA761 is a high-flow magnet valve that achieves higher flow rates than are available in a comparably sized spring-actuated valve. The TA761 has full flow instantly, making it the ideal solution for rapid decompression applications. This high flow also means that fewer valves are required per container when compared to comparably sized spring-actuated valves.

AGM's TA761 magnet breather valves have a predictable, repeatable opening pressures, and a high flow can be achieved regardless of the opening pressure, as compared to spring-actuated valves.

Download Magnet Valve White Paper

The chart below shows the typical flow performance for the TA761 valve. The dashed lines show varying cracking (opening) points. The dotted line shows the performance of a spring-actuated valve of the same size, for comparison purposes.

AGM's TA761 High-Flow Pressure Relief Valve versus Spring-Actuated valves and AGM's TA770 valve performance chart

As shown in the chart above, various cracking pressures are available for the TA761 valve. The reseal pressure of the valve, however, is not selectable due to the valve's high volume of air flow. In many cases, the valve will completely equalize the pressure inside an enclosure with its surrounding atmosphere before the valve closes.

Materials Housing, Cover, Washer & Nut - Aluminum Alloy • Cover Screws - Stainless Steel
Materials (Cont.) Float & Magnet Support - Glass Filled Polycarbonate • Magnets - Nickel Plated Neodymium Iron Boron
Materials (Cont.) Return Spring - Phosphor Bronze • Gasket and Internal Seal - Silicone
Finish Anodize
Mounting Hole Diameter 2.050 ± .04 (50.8 ± 1 mm)
Maximum Wall Thickness 0.75 (19 mm)
Weight 0.331 lbs. (150 grams)
Cracking Ranges Available (psid) 0.1 - 1.0

Housing has hook spanner notches.

TA761 Drawing

TA761 High-Flow Pressure Relief Valve Drawing

Additional Information

Materials

Housing, Cover, Washer & Nut-Aluminum Alloy, Cover Screws-Stainless Steel, Float & Magnet Support-Glass Filled Polycarbonate, Magnets-Nickel Plated Neodymium Iron Boron, Return Spring-Phosphor Bronze, Gasket & Internal Seal-Silicone

Finish

Anodize

Mounting Hole Diameter

2.050 ± .04 (50.8 ± 1 mm)

Maximum Wall Thickness

0.75 in. (19 mm)

Weight

0.331 lbs. (150 grams)

Cracking Ranges Available

0.1-1.0 psid

Operating Temperature

-80°F to +160°F (-62°C to +71°C)