Filler Valve TA322-SS
SKU: TA322-SS

Filler Valve TA322-SS

Description

The TA322-SS Filler Valve is a stainless steel version of the TA322 with a tethered cap assembly and provides a Schrader-style tire valve core in a lightweight minimum length housing.

An air chuck (not furnished by AGM) or an adaptive hose is required to actuate valve. This valve may be used to purge or pressurize containers. See NEPS 1000 to learn more about AGM's nitrogen and dry gas purge systems.

Materials Housing, Cap & Hardware - Passivated Stainless Steel
Mounting Requirements O-ring, washer, lockwasher, & nut, provided with each valve.
Mounting Hole Diameter 0.385 ± 0.010 (9.75 ± 0.25 mm)
Installation Torque 10-15 in. - lbs. (0.9-1.1 N•m)
Maximum Wall Thickness 0.30 (8 mm)
Weight 0.0857 lbs. (38.9 grams)

For threaded boss installation: 0.375-24 UNF-2B

The TA322-SS is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information.

TA322-SS Filler Valve Drawing

Additional Information

Materials

Housing, Cap & Hardware-Passivated Stainless Steel

Mounting Requirements

Hex Nut, O-Ring, Washer & Lockwasher are provided with each valve

Mounting Hole Diameter

0.385 ± 0.010 (9.75 ± 0.25 mm)

Maximum Wall Thickness

0.30 in. (8 mm)

Installation Torque

10-15 in. – lbs. (0.9-1.1 N•m)

Weight

0.0857 lbs. (38.9 grams)