Desiccators with Humidity Indicators TA362 & TA363

AGM TA362 & TA363 desiccators include 2 humidity indicator elements that monitor relative humidity of the container atmosphere & the condition of desiccant.

These Desiccator units were designed primarily for use in small containers.  They incorporate two separate Humidity Indicator elements. The outer element monitors the relative humidity (RH) of the container atmosphere; the center element monitors the condition of the desiccant itself. Desiccators are refillable by removing the endcaps.

The type of desiccant, as well as the type of indicator element desired is specified by designating part number suffixes as shown in the chart below.

The TA362 contains about .25 units (6 grams) of desiccant. The TA363 contains .6 units (14 grams) of desiccant. These desiccators mount through a 1.05" (26 mm) diameter hole or into a mounting flange, 658800.

Materials Aluminum Alloys; Gasket is AMS-R-6855, Class II, Grade 60; Hex nut standard
Finish Clear Anodized
Torque Valve for Hex Nut 30 in. - lbs. (3.4 N•m)
Maximum Internal Pressure 10 psi
Weight TA362: 0.11 lbs. (50 grams); TA363: 0.17 lbs. (77 grams)

The TA363 and TA362 are appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as I66/IP67 enclosures. These items may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information.

TA362 Drawing

TA362 Desiccator Series Part Number Designation Table

DESICCANT REFILLS
Desiccator Series
Silica Gel
Molecular Sieve
TA362
BD920005-6G
BD920514-6G
TA363
BD920005-14G
BD920514-14G
TA364
BD920005-6G
BD920514-6G
TA365
BD920005-14G
BD920514-14G