5" Access Ports

Access ports provide access to desiccant, data or accessory storage areas in containers without opening the container.
Clear Opening Diameter

Make a selection above

Cover Diameter

Make a selection above

Mounting Hole Diameter

Make a selection above

Part Number

Make a selection above

* Required Fields

Product Description


These 5" Access Ports provide access to desiccant, data, accessory storage areas or for diagnostic testing of contents in containers, eliminating the labor of opening the container and reducing the exposure of the contents to hostile environments. In addition, they can be used as temporary through-holes for cabling and tubing. This larger version of our time-tested TA495 has a clear opening of 4.80" (122 mm) diameter. Access Port is installed through a 5.52" (140 mm) dia. hole. Gasket, washer and mounting nut are furnished.

Designed for mounting on a smooth, flat surface; may not seal tightly if surface is curved, domed or too rough.

Tamper-Proof: Holes through cover and flange of Access Port are provided for safety wiring and inspector's seal.

Materials and Finishes: Housing hard anodized, other aluminum alloys conversion coated per MIL-DTL-5541. Stainless steel cover, passivated. Buna-N o-ring and gasket.

Weight: 1.55 lbs. (703 grams)

Torque Value for Spanner Nut: 200 in. - lbs. (22.50 N•m)

Required mounting hole diameter: 5.520 + 0.030 / - 0.015 inches

Rated Pressure: 2.5 PSID

The TA595 (solid cover) is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as I66/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application.

Contact AGM's Engineering department for more information.

TA595 Access Ports Drawing


Additional Information

Name 5" Access Ports
Part Number 5-access-ports
Stock Status Contact Us for Availability
Weight 0.00
Clear Opening Diameter 4.90 in (124 mm)
Mounting Hole Diameter 5.015 in (127 mm)
Rated Pressure 2.5 PSID
Cable Material stainless steel
Cover Material stainless steel
Cover Finish passivated
Body Material aluminum alloys
Body Finish hard anodized
Washer & Nut Material aluminum alloys
Washer & Nut Finish conversion coated
Internal O-Ring Material Buna-N
External Gasket Material Buna-N

Technical Sheets

Please select a product to view technical documents.

AGM COVID-19 Update - Learn More