Custom Desiccators

 
The products below are for reference only and are presented to show the various configurations and materials produced by AGM. Contact AGM to discuss your specific application.
Custom Desiccator A1
 
Custom Desiccator A2
 
Custom Desiccator A3
A1. Desiccator, threaded aluminum plug. Desiccant capacity 0.4 g. For small electro/optical enclosures. A2. Desiccant plug. .500-20 UNEF-2A threaded aluminum can with filter in flange end. Desiccant capacity 0.5 g. For use in small enclosures. A3. High temperature application where temperatures may reach up to 275°F. Replaceable desiccant cartridge capacity 1.6 g.
Custom Desiccator A4
Custom Desiccator A5
Custom Desiccator A6
A4. Controlled breathing desiccator with replaceable desiccant cartridge. Assembly includes RFI/EMI shielding and NBC compatible materials and finishes. Approximately 2" long by 1" O.D. Desiccant capacity 3.5 g. A5. Desiccator plug, refillable, mounts in a 1" hole. Desiccant capacity 3-4 g. For use in electronic, optical or mechanical enclosures. A6. Humidity and moisture indicating, refillable desiccator. Modified catalog item, desiccant capacity 4 g. For use in enclosures that are 250 cubed inches to 1,250 cubed inches.
Custom desiccator B1
Custom desiccator B2
Custom desiccator B3
B1. Desiccant cartridge, molded plastic with woven wine filter. 2" long by 1/2" wide. Desiccant capacity 4 g. For missile guidance systems. B2. Desiccator plug with viewing window and 8:1 free-breathing air flow path. Desiccant capacity 7 g. For installation into a 1.625-16 threaded boss in an electro/ optical or similar mechanical enclosure. B3. Desiccant plug, refillable with either loose desiccant or replaceable cartridge. Mounts in a 1" hole. Desiccant capacity 8 g. For use in electro/optical or similar assemblies.
Custom desiccator B4
Custom desiccator B5
Custom Desiccator B6
B4. Static desiccator, adhesive mounted, 1.5" x 1.0" x 0.5", custom thermo-formed housing with surface filter. Desiccant capacity 10 g. For use in optical, electronic or mechanical enclosures. B5. Desiccant cartridge, disposable. Molded plastic frame and screen. 3" x 0.81". Desiccant capacity 10 g. For use in enclosures from 600 to 3,100 cubed inches. B6. Controlled breathing desiccant holder. May be used with loose desiccant beads or replaceable desiccant cartridges. Various valve settings are available. Desiccant capacity 13 g. Black anodized aluminum construction. For use in electromechanical assemblies where dusting is not critical.
C1 custom desiccator
C2 custom desiccator
C3 custom desiccator
C1. Combination humidity indicator and refillable desiccant tube (shown with refill cap removed). For installation in threaded boss, accessory mounting nut also available. Four-inches long with ¾-14 straight pipe thread flange. Other lengths available. Numerous humidity indicator displays also available. For use in enclosures up to 3.5 cubic feet.

C2. On left is the desiccator, on right is the shipping container. The tape seals the container; if broken, it has been opened. Can use the bottom of the shipping container to open the desiccator.

C3. Desiccant cartridge, refillable, porous membrane tube, 2.75-inches long, .94-inch diameter. Desiccant capacity 16 grams. For use in electro/optical or mechanical systems that cannot tolerate dust.
C4 custom desiccator
C5 custom desiccator
C6 custom desiccator
C4. Controlled breathing, in-line, 5-inch long, desiccant cartridge. Moisture indicating desiccant visible through transparent tube, refillable. Desiccant capacity 18 grams.

C5. Controlled breathing desiccator with replaceable desiccant cartridge. Desiccant capacity 18 grams. For use in airborne equipment or systems requiring easy removal and replacement of desiccant cartridge.

C6. Combination breather valve with replaceable desiccant cartridge. Desiccant capacity 30 grams but can be greater or less than 30 grams depending on the tube length specifications. Numerous valve settings available. For use in enclosures up to 4 cubic feet. May be installed in threaded boss for ease of desiccant replacement.

D1 custom desiccator
D2 custom desiccator
D3 custom desiccator

D1. Static desiccator, flange mounted, 2.8 x 2.0 x 1.0 inches, custom molded plastic shape with 70 micron filter membrane. Desiccant capacity 40 grams. For use in electronic or mechanical enclosures.

D2. Static desiccator, flange mounted, 3.5 x 3.0 x 2.0 inches, custom molded plastic to fit within a special cavity. Desiccant capacity 40 grams. For use in electronic or mechanical enclosures.

D3. Static desiccator, pressure sensitive adhesive mounted, 5 x 2.5 x .5 inches, custom thermo formed housing with surface filter. Desiccant capacity 40 grams. For use in optical, electronic or mechanical enclosures.

D4 custom desiccator
D5 custom desiccator
D6 custom desiccator

D4. Static desiccator, flange mounted, 2.5 x 1.5 x 1.5 inches, molded plastic construction with 70 micron filter membrane. Desiccant capacity 44 grams. For use in electronic or mechanical enclosures.

D5. Desiccant plug, non-dusting, disposable with 1-7/8 12 threaded flange and porous plastic tube. Desiccant capacity 50 grams. Application for electronic, communications, or similar sealed enclosures.

D6. Desiccant cartridge, free breathing with moisture indicating color change card. Two-inch diameter machined aluminum housing. Desiccant capacity 50 grams. For use in enclosures that cannot withstand pressure differentials.

E1 custom desiccator
E2 custom desiccator
E3 custom desiccator

E1. Desiccant cartridge, aluminum tube, wire screen filter and silicone rubber seal. Desiccant capacity 60 grams. May be used adjacent to breather valve and/or humidity indicator.

E2. Desiccant canister, in-line drier. Refillable with transparent tube and miniature quick disconnect fittings at each end, 8-inches long. Desiccant capacity 75 grams.

E3. Controlled breathing desiccator with replaceable desiccant cartridge. RFI/EMI shielded with NBC compatible materials. Desiccant capacity 75 grams. For use in shielded shipping container or missile launch tubes.

E4 custom desiccator
E5 custom desiccator
D6 custom desiccator

E4. Controlled breathing, refillable, 7-inch long desiccant canister. Desiccant capacity 80 grams. Molded plastic construction with transparent tube that permits observation of desiccant color change. For use in systems requiring pressure/vacuum relief due to altitude or temperature changes.

E5. Desiccator, refillable with color change desiccant indicator card. Six-inch long, custom molded porous plastic housing and injection molded base and window. Desiccant capacity 90 grams. For use in electronic or similar assemblies as static desiccator.

E6. Desiccator, aluminum flange, stainless wire screen basket. Refillable includes desiccant condition observation window. Desiccant capacity 100 grams. For use in aircraft, missile or electronic applications.

F1 custom desiccator
F2 custom desiccator
F3 custom desiccator

F1. Desiccator, static adsorber. Six-inch long, custom molded porous plastic tube. Desiccant capacity 100 grams. For use in electro-optical, mechanical or similar enclosures requiring rapid moisture adsorption.

F2. Desiccant cartridge, breathable porous plastic tubing with custom fabricated end brackets. 1.8 inch diameter, 4.5-inch length. Desiccant capacity 110 grams. For use in static dehydration applications where special mounting consideration may be required.

F3. Combination controlled breathing and static desiccator. Refillable desiccator, includes color change indicator card. Aluminum flange and stainless steel wire desiccant basket. Desiccant capacity 136 grams. For use in airborne equipment or systems exposed to altitude and temperature changes.

F4 custom desiccator
F5 custom desiccator
F6 custom desiccator

F4. Controlled breathing desiccator, with desiccant condition indicator disk. Refillable. Desiccant capacity 140 grams. Glass filled polycarbonate plastic housing. For use on airborne or other equipment requiring pressure/vacuum relief during altitude changes.

F5. Desiccant canister, static adsorber, thin aluminum housing with internal filter. 8 x 4 x .5 inches. Desiccant capacity 140 grams. For use in printer circuit board slots to provide a dry environment.

F6. Desiccant holder, capacity 6 units. Provides access for desiccant replacement in sealed containers or enclosures. Only requires a 2-inch mounting hole. Also available with breather valve or humidity indicator.

G1 custom desiccator
G2 custom desiccator
G3 custom desiccator

G1. Desiccator, custom cloth bag, 6-inch diameter. Desiccant capacity 250 grams of molecular sieve desiccant. Use where space limitations or configuration dictate unique shape.

G2. Desiccant canister, disposable, inexpensive construction using 2-3/4-inch O.D. breathable membrane tube with steel end caps. Desiccant capacity 256 grams. Replacement for flexible 8 unit, MIL-D-3464 bags. Other sizes available.

G3. Free breathing, aluminum, refillable desiccant cartridge with desiccant viewing window. Desiccant capacity 300 grams. For use in in-line driers or applications requiring drying of air within a sealed system.

G4 custom desiccator
G5 custom desiccator
G6 custom desiccator

G4. Controlled breathing, refillable, 8-inch long machined aluminum desiccant cartridge. Incorporates desiccant condition indicator. Desiccant capacity 320 grams. For use in enclosures up to 30 cubic feet that require pressure/vacuum relief during altitude or temperature change.

G5. Controlled breathing desiccant canister. Desiccant capacity 500 grams, includes moisture indicating color comparison chart. Five-inch diameter canister constructed from breakable plastic for use in rocket motors, breaks apart upon motor ignition.

G6. Desiccator, transparent 3-inch tube permits observation of color change desiccant material, capacity 500 grams. ¾ NPT fittings each end, for in-line driers or applications requiring dehumidification of air stream.

H1 custom desiccator
H2 custom desiccator
H3 custom desiccator

H1. Desiccant cartridge, disposable; constructed from stock 10-inches long, 2.75-inch diameter transparent tube. Desiccant capacity 525-gram mixture of indicating molecular sieve. For use in equipment requiring in-line driers or static moisture adsorption.

H2. Desiccant canister, controlled breathing, RFI/EMI shielded, NBC compatible, refillable, aluminum construction. Desiccant capacity 680 grams. Military application for long-term harsh/marine environment.

H3. Desiccant canister, thermo (vacuum) formed plastic housing. Desiccant capacity 900 grams, with removable barrier strip. For use in assemblies requiring activation of desiccant several hours after installation of item.

H4 custom desiccator
H5 custom desiccator
H6 custom desiccator

H4. Controlled breathing desiccant canister, refillable, molded plastic housing, includes color change desiccant indicator. Desiccant capacity 900 grams. For rocket motor or jet engine exhaust nozzle installation.

H5. Controlled breathing, custom molded plastic, refillable desiccant canister. Includes color change desiccant indicator. Desiccant capacity 900 grams. For aircraft, airborne missile or rocket motor cavity desiccation.

H6. Desiccant holder. Desiccant capacity 40 units of MIL-D-3464 desiccant. Modified standard catalog item to incorporate RFI/EMI shielding, NBC compatible materials and primed stainless steel cover. Shown with accessory TA770 valve installed in cover.

H7 custom desiccator
I1 custom desiccator
I2 custom desiccator

J1. Free breathing, refillable, desiccant canister for Mil-STD-648 shipping and storage containers.  Desiccant capacity 3500 grams. Item includes moisture indicating color comparison chart, filtered, free breather tube and filtered outlet to container.

J2. Replacement desiccant cartridges may be screwed into back of breather valves, humidity indicators or mounting flanges. For use with all desiccant materials. Capacity is a function of tube length.

J3. Combination breather valve and replaceable desiccant cartridge. Includes RFI/EMI and EMP Shielding. Uses NBC compatible materials and finish. Includes removable protective closure for automatic relief valve.

I3 custom desiccator
I4
I5
J4. In-line air drier with custom housing and mounting bracket. Includes replaceable desiccant cartridge. J5. Static desiccator, injection-molded thermoplastic housing with sintered bronze filter. Desiccant capacity 82 grams. For use in optical, electronic or mechanical enclosures J6. Static desiccator, injection-molded thermoplastic housing, sintered bronze filter, captive fasteners for mounting. Desiccant capacity 48 grams. For use in optical, electronic or mechanical enclosures.