Filler Valve TA322-SS

TA322-SS

The TA322-SS Filler Valve is a stainless steel version of the TA322 with a tethered cap assembly and provides a tire valve core in a lightweight minimum length housing. 

This valve may be used to purge or pressurize containers. See NEPS 1000 to learn more about AGM's nitrogen and dry gas purge systems.

Materials and Finish: Housing, cap, and mounting hardware are all made from passivated stainless steel. Mounting hardware is supplied standard. 

Weight: 0.0857 lbs. (38.9 grams)

Mounting Requirements: Each valve comes complete with o-ring, washer, lockwasher, and nut.
Mounting hole diameter: 0.385 ± 0.010 (9.75 ± 0.25 mm)
Installation torque: 10-15 in. - lbs. (0.9-1.1 N•m)
Maximum wall thickness: 0.30 (8 mm)
Minimum wall thickness: 0
For threaded boss installation: 0.375-24 UNF-2B

The TA322-SS is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information.

 

TA322-SS Drawing