 |
|
|||||||||
 |
 |
|||
| Home | ||||
|
||||
| Custom Assemblies |
||||
|
||||
| Applications | ||||
|
||||
|
||||
| Products By Part Number |
||||
|
||||
|
||||
|
||||
|
||||
| 1" Webbing & Hardware |
||||
|
||||
|
||||
|
||||
|
||||
|
||||
| Frequently Asked Questions | ||||
|
Ratchet Tie Down Buckle Threading & Tensioning Instructions |
|
 1. To thread ratchet buckle, place webbing THROUGH slot in center rotating spool of closed ratchet. |
 2. Pull webbing through, leaving some slack. |
|||||
 3. Start ratcheting (raising and lowering handle). |
 4. Webbing will wind itself and be locked in place so that further ratcheting will rapidly increase tension in strap. |
|||||
Ratchet Tie Down Buckle Release Instructions |
||||||
 1. To release webbing, pull and hold release tab on top assembly to override ratcheting function. . . |
 2. . . .and open ratchet until both assemblies are in-line and top assembly clicks into detent. |
|||||
 3. Grab webbing from non-fixed side and pull to release webbing. |
 4. Pull and hold release tab on top assembly to release from detent. Close ratchet. |
|||||
Instructional Video |
||||||