 Many
fluids, semi-solids and powders are seriously affected by moisture
and other contaminants. Most of the materials which are affected
are stored in tanks which are either located in the open and vented
to atmosphere or are located in the process area and affected by
materials used in the same area. The level of damage varies
from rendering the material useless to the lowering of efficiency
and consequently the value.
Moisture, in the form of water vapor, is the prime source of contamination
and will cause simple dilution of acids, an increase in the corrositivity
of oils and other fluids, fungal and biological activity in materials,
such as glycerol, or the lowering of electrical resistance of transformer
oils and similar materials.
The selective use of desiccants, such as molecular sieves, silica
gel and activated alumina, together with a wide range of adsorbents
in its tank desiccant breathers and adsorption units, enables AGM Container
Controls to offer a high level of protection for a wide range of
materials. |
|
Dimension |
Unit of Measure |
705 |
710 |
715 |
"A" Connection |
NPT |
0.5 |
1.0 |
1.5 |
B |
inches |
4.9 |
6.7 |
10.1 |
C |
inches |
6.9 |
8.7 |
12.0 |
D |
inches |
3.5 |
4.9 |
7.5 |
E |
inches |
1.4 |
1.8 |
1.9 |
F |
inches |
2.0 |
2.0 |
2.0 |
G |
inches |
5.7 |
7.6 |
10.2 |
H |
inches |
7.6 |
15.0 |
15.0 |
Weight |
pounds |
6.6 |
15.4 |
30.9 |
|
|
