TA485 Records Holder

TA485 Records Holder Close up of the TA485 Records Holder Cover TA485 Records Holder

TA485 Records Holders

The TA485 Records Holders are easy to install into large shipping and storage containers to provide a convenient, safe and waterproof place to store larger documents. The TA485 is available in 2 lengths: 12 or 14 inches.
Clear Opening Diameter

Make a selection above

Mounting Hole Diameter

Make a selection above

Stock Status

Make a selection above

Part Number

Make a selection above

* Required Fields

Product Description

Details

Handles larger, bulkier, soft-covered documents. Also tools or other support items.
Simple to install in large shipping and storage containers, the TA485 Records Holder provides a convenient, safe and easily accessible place for inspection records and instructions.

The lightweight Records Holder is waterproof and pressure tight up to 5 psig. The Records Holder is sealed to the container from the outside by a retained gasket. An o-ring in the spring loaded cover seals the interior of the records compartment from the outside.

Designed for mounting on a smooth, flat surface; this item may not seal tightly if surface is curved or domed or too rough.

Simple to Use. Roll the records or instructions and insert into tube. Press on cover and turn about 60°.

Easily Installed. Install the Records Holder through a 4.015" (102 mm) dia. hole in container wall. Gasket, washer and mounting nut are furnished. Blind threaded insert provided in end of tube for additional support.

Tamper-Proof. Holes through cover and flange of records holder are provided for safety wiring and inspector's seal.

Materials and Finish: Aluminum alloys, conversion coated per MIL-DTL-5541. Stainless steel cover, passivated. Buna-N o-ring and gasket.

Torque Value for Spanner Nut: 150 in. - lbs. (17 N• m).

TA485 Selection ChartTA485 DrawingTA485 Drawing

Specifications

Additional Information

Name TA485 Records Holders
Part Number TA485
Stock Status Contact Us for Availability
Weight 0.00
Clear Opening Diameter 3.30 in (84 mm)
Mounting Hole Diameter 4.015 in (102 mm)
Recommended torque for spanner nut 150 lb in
Cable Material stainless steel
Cover Material stainless steel
Cover Finish passivated
Body Material aluminum alloys
Body Finish conversion coated
Internal O-Ring Material Buna-N
External Gasket Material Buna-N

Technical Sheets

Please select a product to view technical documents.