TA475 Records Holder

TA475 Records Holder TA475 Records Holder Close up of the TA475 Records Holder Cover

TA475 Records Holder

The TA475 Records Holder adequately holds a few sheets of rolled up paper. AGM's Records Holders are installed into a shipping or storage container for easy access without having to open the container.
Clear Opening Diameter

1.69 IN (43 MM)

Records Holders Length

8.69 IN (221 MM)

Mounting Hole Diameter

2.015 IN (51 MM)

Stock Status


Part Number


Product Description


Adequate for a few sheets rolled up papers up to legal size (8-1/2" x 14").
Simple to install in shipping and storage containers, the TA475 Records Holder provides a convenient, safe and easily accessible place for inspection records and instructions.

The lightweight Records Holder is waterproof and pressure tight up to 5 psig. The Records Holder is sealed to the container from the outside by a retained gasket. An o-ring in the spring loaded cover seals the interior of the records compartment from the outside.

Designed for mounting on a smooth, flat surface; this item may not seal tightly if surface is curved or domed or too rough.

Simple to Use. Roll the records or instructions and insert into tube. Press on cover and twist about 30°.

Easily Installed. Install the Records Holder through a 2.02" (51 mm) dia. hole in container wall. Gasket, washer and mounting nut are furnished.

Tamper-Proof. Holes through cover and flange of records holder are provided for safety wiring and inspector's seal.

Materials and Finish: Aluminum alloys, conversion coated per MIL-DTL-5541. Stainless steel cover, passivated. Buna-N o-ring and gasket.

Weight: 0.31 lbs. (140 grams)

Torque Value for Hex Nut: 80 in. - lbs. (9 N•m)

TA475 Drawing


Additional Information

Name TA475 Records Holder
Part Number TA475
Stock Status Contact Us for Availability
Weight 0.31 lbs
Clear Opening Diameter 1.69 in (43 mm)
Records Holders Length 8.69 in (221 mm)
Mounting Hole Diameter 2.015 in (51 mm)
Recommended torque for spanner nut 80 lb in
Cable Material stainless steel
Cover Material stainless steel
Cover Finish passivated
Body Material aluminum alloys
Body Finish conversion coated
Internal O-Ring Material Buna-N
External Gasket Material Buna-N

Technical Sheets

Please select a product to view technical documents.