Records Holders: Records Holder TA475


			Home

			Products

			Records Holders Catalog

			Frequently Asked Questions

Records Holder TA475

Adequate for a few sheets up to legal size (8-1/2" x 14").

Simple to install in shipping and storage containers, the TA475 Records Holder provides a convenient, safe and easily accessible place for inspection records and instructions.

The lightweight Records Holder is waterproof and is sealed from the inside of the container by a retained gasket. An o-ring in the spring loaded cover seals the records compartment from the outside.

Designed for mounting on a smooth, flat surface; may not seal tightly if surface is curved or domed.

Simple to Use. Roll the records or instructions and insert into tube. Press on cover and twist about 30°.

Easily Installed. Install the Records Holder through a 2.02" (51 mm) dia. hole in container wall. Gasket, washer and nut are furnished.

Tamper-Proof. Holes through cover and flange of records holder are provided for safety wiring and inspector's seal.

Materials and Finish: Aluminum alloys, alodined per MIL-C-5541. Stainless steel cover, passivated. Buna-N o-ring and gasket. Weight: 0.31 lbs. (140 grams) Torque Value for Hex Nut: 80 in. - lbs. (9 N•m)

TA475 Drawing


	AGM CONTAINER CONTROLS, INC. • 3526 East Fort Lowell Road • Tucson, AZ 85716 www.agmcontainer.com • sales@agmcontainer.com • 1-800-995-5590 or 520-881-2130 • Site Map AGM's Blog

	Access Ports \| Breather Valves \| Desiccant \| Desiccant Breathers \| Desiccant Reactivator Units \| Desiccators Filtered Storage Bag Vents \| Humidity Indicators \| Humidity Meters \| Immersion Proof Breathers \| In-Line Desiccators Nitrogen Purge Systems \| Observation Windows \| Records Holders \| Shelter Static Dehumidifiers \| Shipboard Mounting Systems Shock Indicators & Recorders \| Temperature Monitors \| Tie Down Shelving \| Tie Downs \| VCI Rust Prevention \| Wheelchair Lift