Plastic Immersion Proof Breather
TA256-1

TA256 Plastic Immersion Proof Breather  

The TA256-1 Immersion Proof Breather is one of AGM’s most economical immersion proof breathers. It has a relatively high flow rate compared to similarly sized breathers, and an immersion depth of up to 9.2 ft. This corresponds to a water intrusion pressure of about 4 PSID.

The TA256-1 is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 3X, 3RX, 3SX, 4, 4X, 5, 6, 6P, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures.

NOTE: This breather can be used in commercial transit cases.

 
TA256-1 Immersion Proof Breather
 
 

Part No.: TA256-1
Mounting: Friction fit into a 21/64” hole or with a 5/16” external retaining ring for thin walls.
Material:
ABS, black

 
 
 

AGM's phone system will be unavailable around 3pm(MST) for approximately 2 hours.

To contact AGM during this time, please send an email to AGMWebSales@agmcontainer.com or fill out a Contact Us form, and we will get back to you as soon as possible.