Plastic Immersion Proof Breather TA242-1

TA242-1 Immersion Proof Breather Valve
 

The TA242-1 Immersion Proof Breather is one of AGM's most economical breathers while boasting a relatively high flow rate for an immersion breather. Made from black ABS plastic, with a pleasing rounded appearance, it is approximately 1 ¼” in diameter and extends about 3/8” above its mounting surface. The TA242-1 fits snugly into a .323” diameter hole (drill size P), or it may be retained in a thin wall (1/8” or less) with a 5/16 internal star washer.

The TA242-1 is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 3X, 3RX, 3SX, 4, 4X, 5, 6, 6P, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures.

NOTE: This breather may not be used in commercial transit cases.

             
TA242-1 Immersion Proof Breather Drawing
             
 

Part No.: TA242-1
Mounting:
Friction fit into a .323 (drill size P) hole or with a 5/16 internal star washer
Material:
ABS, black
O-Ring:
Neoprene, commercial grade