These Desiccator units were designed primarily for use in small containers.  They incorporate two separate Humidity Indicator elements.  The outer element monitors the relative humidity (RH) of the container atmosphere; the center element monitors the condition of the desiccant itself.  Desiccators are refillable by removing the end caps.

The type of desiccant, as well as the type of indicator element desired, is specified by designating part number suffixes as shown in the chart below.

The TA364 contains about .25 units (6 grams) of desiccant.  The TA365 contains .6 units (14 grams) of desiccant.  These desiccators mount through a 1.05" (26 mm) diameter hole.

Materials and Finish: Aluminum alloys. Standard finish, clear anodized.  Gasket material is per AMS-R-6855, Class II, Grade 60.  Hex nut optional; Available with hex nut as P/N 356056-16. Torque value for hex nut: 30 in. - lbs. (3.4 N•m)

Weight:
TA364: 0.07 lbs. (32 grams)
TA365: 0.13 lbs. (58 grams)

The TA364 and TA365 are appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as I66/IP67 enclosures. These items may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information.

DESICCANT REFILLS: