The TA322 Filler Valve provides a tire valve core in a lightweight minimum length housing.  This valve may be used to purge or pressurize containers. See NEPS 1000 to learn more about AGM's nitrogen and dry gas purge systems.

An air chuck is required to actuate valve (not furnished by AGM).  The cap may be secured to the housing by a user-supplied safety wire.

Materials and Finish: Housing and cap are black anodized aluminum alloy.  AN/MS mounting hardware is supplied.  Weight: 0.0302 lbs. (13.7 grams)

To meet SAE specification AS5017, ask for TA322-1958.

Mounting Requirements: Each valve comes complete with o-ring, washer, lockwasher, and nut.
Mounting hole diameter: 0.385 ± 0.010 (9.75 ± 0.25 mm)
Installation torque:  8-10 in. - lbs. (0.9-1.1 N•m)
Maximum wall thickness: 0.30 (8 mm)
Minimum wall thickness: 0
For threaded boss installation: 0.375-24 UNF-2B; 0.385 ± 0.010 (9.75 ± 0.25 mm) diameter X 0.10 (2.5 mm) minimum deep counterbore required for thread relief.

The TA322 is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information.