Materials and Finish: Housing, cap, and mounting hardware are all made from passivated stainless steel. Mounting hardware is supplied standard.
Weight: 0.0857 lbs. (38.9 grams)
Mounting Requirements: Each valve comes complete with o-ring, washer, lockwasher, and nut.
Mounting hole diameter: 0.385 ± 0.010 (9.75 ± 0.25 mm)
Installation torque: 10-15 in. - lbs. (0.9-1.1 N•m)
Maximum wall thickness: 0.30 (8 mm)
Minimum wall thickness: 0
For threaded boss installation: 0.375-24 UNF-2B
The TA322-SS is appropriate for use on NEMA 1, 2, 3, 3R, 3S, 4, 5, 6, 12, 12K, and 13 enclosures, as well as IP65/IP67 enclosures. This item may also be appropriate for use on other NEMA or IP enclosures, depending upon the application. Contact AGM's Engineering department for more information.
|
