 Meets SAE AS5135
These
Access Ports provide access to desiccant, data, accessory storage
areas or for diagnostic testing of contents in containers, eliminating the labor of opening the container,
and reducing the exposure of the contents to hostile environments. Access Port
is installed through a 4.015 in. (102 mm) dia. hole. Gasket,
washer and mounting nut are furnished.
Designed for mounting on a smooth, flat surface; may not seal tightly if surface
is curved, domed or too rough.
The TA495-3 has a 1.050 in. (26 mm) dia. hole in cover for mounting Series
TA238, TA240-R, TA330, TA333-R, or TA340-R Two-Way
Pressure Relief Valves. (Order valves separately.)
Tamper-Proof. Holes through cover and
flange of Access Port are provided for safety wiring and inspector's
seal.
Materials and Finishes: Aluminum
alloys, conversion coated per MIL-C-5541. Stainless steel
cover, passivated. Buna-N o-ring and gasket. Weight:
0.94 lbs. (427 grams) Torque Value for Spanner Nut:
150 lb. in. (17 N•m)
Contact AGM's Engineering department for information on NEMA and IP ratings.
Required mounting hole diameter: 4.015 + 0.030 / - 0.015 inches |
|
